STOCK# 80295 | DECKEL, MAHO DMC 60T, 5 AXIS, VERTICAL MACHINING CENTER NEW: 2007

Verified
80295_1.jpg
1650 Voyager Ave., Suite A - Simi Valley, CA 93063

SPECIFICATIONS:
TRAVELS:
–X AXIS: 30.71″
–Y AXIS: 22.05″
–Z AXIS: 22.05″
MADE IN PFRONTEN, GERMANY.
MAX WORKPIECE DIMENSIONS 23.62″, 22.64″HEIGHT, 882 LBS
ROTARY PALLET CHANGER WITH INTEGRATED NC ROTARY TABLE (C-AXIS)
NC ROTARY TABLE WITH DIRECT MEASURING SYSTEM
ROTATION RANGE: 360 X 0.001 DEGREE (FULL 4TH AXIS)
CLAMPING SURFACE: 19.7″ X 24.8″ (500 MM X 630 MM)
NUMBER OF PALLETS: 2
MAXIMUM TABLE LOAD: 880 LBS
SWIVEL RANGE: 150 DEGREES (-120/+30 DEGREES)
DUE TO THE SWIVEL RANGE OF 30 DEGREES ACROSS THE HORIZONTAL OR VERTICAL AXIS.THIS GIVES YOU ADVANCED FLEXIBILITY FOR COMPLEX PARTS LIKE IMPELLERS.

-INTEGRATED MOTOR SPINDLE-
POWER 40% ED: 37.55 HP (28 KW)
POWER 100% ED: 25.5 HP (19 KW)
SPINDLE SPEED RANGE: 12,000 RPM
SPINDLE TAPER: CAT40

FEED RATE X/Y/Z: 590 IPM (15 M/MIN)
RAPID FEED RATE X/Y/Z: 1,968 IPM (50 M/MIN)

-60 POSITION VERTICAL CHAIN AUTOMATIC TOOL CHANGER-
MAXIMUM TOOL WEIGHT: 17.64 LBS (8 KG)
MAXIMUM TOOL DIAMETER WITHOUT FREE POCKETS: 3.15″ (80 MM)
MAXIMUM TOOL DIAMETER WITH FREE POCKETS: 6.3″ (160 MM)
MAXIMUM TOOL LENGTH: 12.4″ (315 MM)
TOOL CHANGE TIME APPROXIMATELY 0.8 SECONDS, DOUBLE GRIPPER TOOL CHANGER
CHIP-TO-CHIP TIME APPROXIMATELY 4 SECONDS VERTICAL, 10 SECONDS HORIZONTAL

OPERATION VOLTAGE: 400 V INPUT (COMES WITH MULTI INPUT TRANSFORMER)
CONTROL VOLTAGE: 24 V
MAX AT 100% DUTY CYCLE: 100 A
POWER CONSUMPTION AT 100% DUTY CYCLE: 64 KVA
RECOMMENDED NET PROTECTION: 100 A
RECOMMENDED SHORT CIRCUIT: 3.6 MVA
COMPRESSED AIR REQUIRED: 87 PSI (6 BAR)
TOTAL WEIGHT WITH PALLET CHANGER: APPROXIMATELY 22,000 LBS (9 TONS)
3-POINT SUPPORT WITH 3 LEVELING SHOES, NO SPECIAL FOUNDATION REQUIRED

-ITEMS TO SHIP-
1/4: DMG DMC60T: APPROX 152″ L X 134″ W X 100″ H, 22,000 LBS
2/4: COOLANT TANK: APPROX 90″ L X 56″ W X 66″ H, 1,500 LBS
3/4: CHIP CONVEYOR: APPROX 127″ L X 27″ W X 77″ H, 1,000 LBS
4/4: TRANSFORMER ON SKID: APPROX 48″ SQUARE, 500 LBS

EQUIPPED WITH:
100MM DISTANCE T-SLOT PALLETS
HEIDENHAIN ITNC530 CNC CONTROL WITH HR410 ELECTRONIC HANDWHEEL
BLUM LASER TOOL LENGTH AND DIAMETER MEASURING, HORIZONTAL/VERTICAL
COOLANT THRU-SPINDLE 580 PSI
AUTOMATIC PAPER FILTER CLEANING WITH FINE FILTERING OF THE COMPLETE
CHIP CONVEYOR
AIR BLAST THROUGH SPINDLE CENTRE, SELECTED WITH M-FUNCTION
SPRAY PISTOL WITH PUMP
MULTI INPUT TRANSFORMER
HEIDENHAIN GLASS SCALES DIRECT MEASURING SYSTEM X/Y/Z AXES
HEIDENHAIN ROTARY ENCODERS DIRECT MEASURING SYSTEM B/C AXES
EXTERNAL COOLANT NOZZLES ON OUTSIDE OF SPINDLE AIR/COOLANT SELECTABLE
AUTOMATIC SWITCH-OFF OF POSITIVE AIR PRESSURE FOR THE MAIN SPINDLE AFTER WORK END
LINEAR ROLLER GUIDEWAYS AND DIGITAL DRIVES. STABILITY AND HIGH PRECISION ARE ENSURED WITH ROLLER GUIDEWAYS WITH OVER-DIMENSIONED DISTANCES BETWEEN THE GUIDEWAYS. THE TABLE CENTRE OF GRAVITY MOVES IN BETWEEN THE VERTICAL GUIDEWAYS (Z-AXIS).
ELECTRONIC TEMPERATURE COMPENSATION
SPINDLE CHILLER
MANUALS AND CD
FULL ENCLOSURE OF MACHINING AREA FOR SAFETY AND NOISE REDUCTION
SENSITIVE MACHINE PARTS (MEASURING SYSTEMS, LIMIT SWITCHES, GUIDE-WAYS, DRIVES) ARE SEPARATE FROM THE MACHINING AREA
AUTOMATIC PALLET CHANGER.

Showing 10 results
Post as a guest by filling out the fields below or if you already have an account.
Name*
E-mail*
Website
Message*