SPECIFICATIONS

SWING OVER BED: 14.6″
SWING OVER CROSS SLIDE:
STANDARD: 14.6″
TURRET 2: 11.8″
MAX DISTANCE BETWEEN CENTERS: 35″
MAX TURING DIAMETER
SPINDLE 1: 14.6″
TURRET 2: 8.3″
MAX TURING LENGTH: 16.7″
BAR WORK CAPACITY: 2.0″
SPINDLE 1
MAX. SPINDLE RPM: 6000 RPM
MOTOR: 15 / 15 / 10 HP (40% / 30 MIN / CONT)
NO. OF SPINDLE SPEED RANGES: 2
SPINDLE NOSE: A2-5
THROUGH SPINDLE HOLE DIAMETER: 2.4″
MIN. SPINDLE INDEXING INCREMENT: 0.0001 DEG
SPINDLE TORQUE: 164.5 40% / 116.5 CONT (FT-LBF)
SPINDLE 2
MAX. SPINDLE RPM: 6000 RPM
MOTOR: 10 / 7.5 HP (25% / CONT)
NO. OF SPINDLE SPEED RANGES: 1
SPINDLE NOSE: G6 FLAT NOSE
MIN. SPINDLE INDEXING INCREMENT: 0.0001 DEG
SPINDLE TORQUE: 36.1 15% / 16.2 CONT (FT-LBF)
TOOL SPINDLE
TOOL SPINDLE SPEED: 12000 RPM
MOTOR: 12 / 7.5 HP (25% / CONT)
SPINDLE TORQUE: 36.1 15% / 16.2 CONT FT-LBF
TOOL CHANGING TIME TOOL TO TOOL: 1.2 SEC
MAX TOOL DIAMETER: 2.8″ / 5.1″ W/O ADJ.
MAX TOOL LENGTH: 9.8″
MAX TOOL WEIGHT: 11 LBS
TOOL CAPACITY: 40
TURRET 2
NO. OF TOOL STATIONS: 10
SHANK DIA. FOR BORING BAR: 1.25″
MAX ROTARY TOOL SPINDLE SPEED: 6000 RPM
MOTOR: 2 / 1.6 HP (15% / CONT)
SPINDLE TORQUE: 3.5 15% / 1.7 CONT FT-LBF
TOOL SPINDLE TRAVEL
X-AXIS (IN):
X1: 15.0
X2: 18.1
Y-AXIS (IN): Y: +/- 4.1
Z-AXIS (IN): Z1: 18.1 +/- 6.1
Z2: 24.0
FEEDRATE
RAPID TRAVERSE (X,Y,Z) (IPM)
X1:1575
X2: 1181
Y1: 1757
Z1:1969
Z2: 1181
WORKPIECE DISCHARGE UNIT A-AXIS: 1417 IPM
DIMENSIONS
LENGTH WIDTH:
FLOOR AREA INCLUDING TOOL MAGAZINE (IN): 106.5/95.5
HEIGHT – EQUIPMENT CLEARANCE ONLY (IN): 94.5
EQUIPMENT WEIGHT (LBS): 18740 LBS

EQUIPPED WITH

CONTROL MSX-711IV
SUB TURRET WITH MILLING
SUB SPINDLE
CHIP CONVEYOR