SPECS:
MAX. SWING OF WORKPIECE: 28.7”
MAX. TURNING DIAMETER: 25.9”
MAX. TURNING LENGTH: 58.9”
BAR WORK CAPACITY: 3.5”
X-AXIS TRAVEL / Y-AXIS TRAVEL <TOOL SPINDLE>: 29.5” / ±8.3”
Z-AXIS TRAVEL <TOOL SPINDLE> ＋ FOR ATC: 61” + 3.9”
B-AXIS ROTATION RANGE <TOOL SPINDLE>: +-120 DEGREES
MAX. SPINDLE SPEED: 3,000 RPM <SPINDLE 1 /SPINDLE 2 >
SPINDLE NOSE JIS A2 -8 <SPINDLE 1>: JIS A2 -8 <SPINDLE 1 / SPINDLE 2>
MIN. B-AXIS INDEXING INCREMENT: 1 DEGREE
MAX. TOOL SPINDLE SPEED MIN-1: 12,000 RPM
TAPER HOLE OF TOOL SPINDLE: CAPTO C6
TOOL STORAGE CAPACITY CHAIN TYPE:100 ATC
WITH ADJACENT TOOLS / WITHOUT ADJACENT TOOLS: 2.7” / 5.5”
MAX. TOOL LENGTH MM: 15.7”
MAX. TOOL MASS: 17.6 LBS
TOOL SPINDLE X: 1968 IPM Y: 1181 IPM Z: 1968 IPM
SPINDLE 2 A: 1181 IPM B: 1574 IPM
SPINDLE 1 DRIVE MOTOR <30 MIN / CONT>: 30/25 HP
SPINDLE 2 DRIVE MOTOR <30 MIN / CONT> KW (HP): 30/25 HP
TOOL SPINDLE DRIVE MOTOR <10 MIN / CONT> 25/15 HP
EQUIPPED WITH:
FANUC SERIES 31IA5 CNC CONTROL
TOOL SPINDLE FULL INDEXING SPECIFICATIONS
SPINDLE 2 TAILSTOCK SPECIFICATIONS
TOOL STORAGE CAPACITY 100 TOOLS (CAPTO C6)
CHUCK TOP COOLANT FOR SPINDLE 1
CHUCK TOP COOLANT FOR SPINDLE 2
PREP ONLY SUPER HIGH PRESSURE COOLANT SYSTEM I/F
PREP ONLY MIST COLLECTOR
AIR BLOW FOR CHUCK (SPINDLE 1)
AIR BLOW FOR TOOL TIP (TOOL SPINDLE)
PREP FOR RENISHAW MP700 PROBE)
TOOL PRESETTER
PARTS CATCHER + WORKPIECE CONVEYOR
AUTOMATIC DOOR
ETHERNET I/P I/F
5 EXTERNAL M-CODES
PROGRAMMING RESOLUTION MULTPLIED BY 1/10
PART PROGRAM STORAGE LENGTH 8MB + REGISTERABLE PROGRAMS 4,000 IN TOTAL
INVERSE TIME FEED
PROGRAM NUMBER 8-DIGIT O CODE
PROGRAM RESTART
TOOL AXIS DIRECTION HANDLE FEED
ESPRIT FOR MAPPS
THROUGH SPINDLE COOLANT / AIR SWITCHING SPECIFICATION BY M CODE
CHIP CONVEYOR (HINGE BELT, RH SIDE)
HIGH PRESSURE COOLANT UNIT JV-40 W/CSA) CHIP BLASTER
SPINDLE 1 & 2: 12” KITAGAWA CHUCK
